PredatorUnleashed Model Comparisons


Predator Unleashed!  systems are our most compact, full- performance systems.  They feature “bullet- proof” centrifugal continuous discharge pumps for unlimited recovery capability and are therefore well- suited for very large jobs at which continuous discharge to approved areas is allowed.  They are also well- suited for installation in vans in which maximum cargo space is desired. 

Common Features to All Predator Unleashed Models:

  • Direct- coupled drive configuration
  • Change drive couplings and belt in less than 5 minutes
  • High- output flow- fired propane or oil- fired water heaters
  • High pressure capability
  • Roots DSL “no grease” vacuum pumps
  • Run- dry centrifugal continuous discharge pump:  50 GPM
  • Waste water Separation Tank is made of heavy gauge aluminum
  • Super- compact 21” W x 58” L footprint, includes heater and tank


The drive method used in these systems is direct- coupled, featuring unique innovations for quick and easy alignment and replacement of the drive coupling when necessary.  Alignment is easy to check and simple to adjust.  The commonly available Lovejoy #7 coupling insert is the connector between engine and blower.

  • Engine “Slide Plate” allows for simple, quick de-coupling of engine / blower
  • Blower “Leveling Plate” allows for precise “dial- in” adjustment of alignment
  • Drive ratio between engine and blower is 1 to 1

Predators have been designed from the ground up to be solid workhorses that deliver unparalleled performance. Like our other systems, they feature our “UltraFlow” approach to airflow in the vacuum system. This means that performance- robbing airflow restriction is virtually eliminated.

  • Diameter of vacuum airways is as large as the vacuum port of the blower
  • Exhaust plumbing is larger than the exhaust port of the blower
  • Vacuum airways are as short as possible
  • 90- degree turns in the vacuum airways are eliminated where possible
  • When 90 degree turns cannot be avoided, oversized ”sweeps” are used.

All Predator Unleashed systems feature flow- fired industrial heaters with a 10,000 PSI pressure capability. The heat capability that they deliver is perhaps what they are best known for, with regard to overall performance.  All provide:

  • Fully adjustable temperature, from input temperature to maximum
  • Dependable 230 degrees at the wand, continuous output temperature.
  • 200 + degrees of continuous heat through a tile spinner tool @ 1,200 PSI.
  • 1,200 PSI available pressure at 3.5 GPM

We are so confident of the heat capability of these systems, that we are the only manufacturer to supply temperature gauges on the wands supplied with them.

Predator Unleashed Model




20 HP Kohler Command Pro

25 HP Kohler Command Pro

Vacuum Pump

Roots 36 DSL

Roots 45 DSL

Vacuum Spec’s

278 CFM                   @ 15” Hg.

332 CFM              @ 16” Hg.

Solution Pump

Cat 290

Cat 290

Pressure Spec’s

To 1,200 PSI            @ 3.5 GPM

To 1,200 PSI        @ 3.5 GPM

Heater BTU

234,000 BTU


Heat Spec’s

150 degrees rise    over input                @ 2.0 GPM

150 degrees rise over input             @ 2.0 GPM

Recovery Tank  

NONE        Continuous 50 GPM  Discharge

NONE     Continuous 50 GPM Discharge

Hose: Vacuum

200 ft.

200 ft.

Hose: Pressure

200 ft.

200 ft.

Hose: Water

100 ft.

100 ft.

Hose Reels

Vac., Water, Sol.

Vac., Water, Sol.


(1)                      Stainless Steel  double bend                with 2 jets    

(1)             Stainless steel  double bend        with 2 jets

Best Range

Up to 500 ft.

Up to 800 ft.        


21” W  x  58” L

21” W  x  58” L