SplitSteam Model Comparisons

SplitSteam series systems are our high- performance  industrial systems designed with two vacuum pumps for true, dual- wand operation.The full-sized recovery tanks contain two independent chambers, that allow for connection of the two for single- wand application.  They are designed to be ultra- user- friendly with regard to operation and maintenance.

Common features to all SplitSteam models: 

  • Belt- drive configuration
  • High heat capability.
  • High pressure capability
  • Change any belt in less than 5 minutes
  • Roots DSL “no grease” vacuum pumps
  • Available with propane, or oil- fired heat.

SEE THE VIDEO FOR DETAILED EXPLANATION.

The drive method used in these systems is belt- drive, featuring large pulleys and commonly- available BX series drive belts for maximum power transfer.  Larger pulleys provide:

  • Larger contact radius with the drive belt for better traction
  • Less need for high belt tension to prevent slippage
  • Reduced “side- load” related wear on drive bearings

Like all of our systems, SplitSteams, have been designed from the ground up to
be solid workhorses that deliver unparalleled performance. Like our other systems, they feature our “UltraFlow” approach to airflow in the vacuum system. This means that performance- robbing airflow restriction is virtually eliminated.

  • Diameter of vacuum airways is as large as the vacuum port of the blower
  • Exhaust plumbing is larger than the exhaust port of the blower
  • Vacuum airways are as short as possible
  • 90- degree turns in the vacuum airways are eliminated where possible
  • When 90 degree turns cannot be avoided, oversized ”sweeps” are used.

All SplitSteam systems feature flow- fired industrial heaters with a 10,000 PSI pressure capability. The heat capability that Dominators deliver is perhaps what they are best known for, with regard to overall performance.  All SplitSteams provide:

  • Fully adjustable temperature, from input temperature to maximum
  • Dependable 230 degrees at the wand, continuous output temperature.
  • 200 + degrees of continuous heat through a tile spinner tool @ 1,500 PSI.
  • 2,000 PSI available pressure at 4 GPM

We are so confident of the heat capability of these systems, that we are the only manufacturer to supply temperature gauges on the wands supplied with them.

SplitSteam Spec’s…

Engine 

40 HP Kohler Command Pro

Vacuum Pump

(2) Roots 36 DSL

Vacuum Spec’s

278 CFM           @ 15” Hg.

Solution Pump

Cat 5CP 2150

Pressure Spec’s

To 2,500 PSI           @ 4.0 GPM

Heater BTU

350,000

Heat Spec’s

150 degrees  rise over input          @ 4 GPM

Recovery Tank  

120 gal Usable Capacity  Dual Chamber         

1/8" 304 Stainless Steel

 

Hose: Vacuum

300 ft.

Hose: Pressure

300 ft.

Hose: Water

100 ft.

Hose Reels

Vacuum, Water,       (2) Solution.

Wand(s)

(2)  Stainless steel  double bend 2 jets

Best Range

Up to 800 ft.         (or 2 @ 500 ft.)

Price:

$23,5000